Sentar II Sentar II

Sentar II™

Application

6, 12, 18, 24, 30, and 36 Stations Commercial Outdoor/Indoor

The Sentar II has long been noted as the “workhorse” of irrigation controllers. It offers advanced control features for a fraction of the cost of similar models. Designed with the irrigation manager in mind, the Sentar II protects landscapes by offering; rain sensing, flow sensing, and cycle and soak scheduling on any of 4 fully independent programs.

Key Features

  • Four independent programs
    Five start times for a total of 20 possible start times per day
  • Commercial-grade,lockable steel & stainless steel cabinet and pedestals
    For vandal resistance and longer service life
  • Cycle and soak
    To eliminate runoff and conserve water
  • Seven day week or skip-by-day scheduling
    To match water restrictions and varied plant water requirements
  • Non-volatile memory
    Retains all program data indefinitely during outages or shutdowns
  • Programmable overlap protection
    Allows programs to run one after the other (stack mode) or at the same time (no stack mode)
  • Built-in remote jack
    For use with Irritrol Pro Max™ remotes and optional permanent mount receiver

Operating
Specifications

  • Programmable master valve and pump allows the master valve or pump to be assigned to any program
  • Programmable time delay between stations (from 1 to 256 seconds) permits slow-closing valves to fully close
  • Programmable security code allows entry of a 1-4 digit number as a security code to prevent access by unauthorized personnel
  • Programmable rain sensor can be assigned on a per program basis
  • Programmable alarm to enable or disable an audible alert in the event of a field wire fault

Electrical
Specifications

  • Input power required: 105-130V ac, 50/60 Hz, 0.5 amp maximum, 0.1 amp idle
  • Output power: 24V ac 1.5 amps maximum total output (36VA) 1 amp per station or master valve
  • UL, CUL and FCC Approved

Dimensions

  • SE Series: 10” x 13” x 4 ½”
  • SE-B & SB Series: 17 ½ “ x 13” x 4 ½”
  • RMPED-1: 16” x 34” x 16”

Specifying
Information

Optional
Accessories

  • PMRKIT: Permanent mount receiver kit for use with Pro Max™ remote
  • RMPED-1: Outdoor pedestal